home *** CD-ROM | disk | FTP | other *** search
- Silver Boxing
-
-
- How to build a SILVER box:
-
-
- Tools and materials : Soldering Iron, Solder, Some 22 ga.wire, a SPDT switch,
- and a screwdriver.
-
-
- 1) Unscrew your phone (must be a touch tone, desk type)
- 2) Remove the mounted pad and take the clear plastic cover from the bottom.
- 3) Hold the pad with the numbers 0, *, # facing you, and turn
- it upside down, so you can see the yellow pc board.
- 4) You should see 2 black round doughnuts.
- 5) Position the board so the solder points for the left doughnut face you.
- 6) Count over four points from the left, and attach a (green) wire to that
- point.
- 7) Between you and the doughnuts, there should be 2 long yellow
- capacitors. To the right of these, and on the edge of the
- board there should be 3 gold contacts. We will use the one on the left.
- 8) The contact originally is spot welded, so snip it open.
- 9) To the one nearest you, attach a (red) wire to the other one, a (yellow)
- wire.
- 10) Run the wires out of the phone, and solder the switch.
- 11) The orientation should be (red) to center. The switch will
- now alternate between normal and 1633hz fourth column tones.
- SILVER BOX DOCUMENTATION
-
- (CONTRIBUTED BY LEX LUTHOR)
-
- THE SILVER BOX TRANSFORMS KEYS 3,6,9,# TO A,B,C,D.
- THOSE TONES STAND FOR:
- "A"- FLASH
- "B"-FLASH OVERRIDE (PRIORITY
- "C"-PRIORITY COMMUNICATION
- "D"-PRIORITY OVERIDE (TOP MILITARY)
- THOSE KEYS ONLY WORK ON CERTAIN NETWORKS. NOW WHAT DO YOU DO WITH THOSE EXTRA
- TONES??? CALL ANY LONG DISTANCE DIRECTORY BY DIALING (AREA CODE) 555-1212
- AND WHILE IT RINGS PRESS THE # KEY THEN AS THE OPERATOR ANSWERS YOU WILL
- DISCONNECT THEM INSTANTLY AND HEAR A PULSING TONE, PRESS 6(NORMAL TON
- E) AND IT WILL STOP.THEN IF ANOTHER PERSON DOES THE SAME THING ON ANOTHER
- LINE AND THEN PRESSES 7 YOU SHOULD HAVE A VOICE LINK, 414 A/C IS GOOD FOR ONE
- THAT YOU CAN SCREW AROUND WITH THE TONES AND SEE WHAT YOU GET.